Tutorial installing retropie for pi2scart

Only the scripts v 0.7.1
https://drive.google.com/…/fo…/0B8uZtHByEHyBMkNRRmk4T2E1ZUk…

This image was made Michael Vencio. It was based on his findings on the FB Group pi2jamma

Install Instructions :

1. Download and write using Win32DiskImager retropie 4.3 to sd card

2. Place SD card in the raspberry pi and power on

3. Expand Filesystem
Retropie > raspi-config > 7 > A1

4. Configure WIFI or Wired Internet

5. Transfer Roms and Bios

6. Press Start > Quit > Restart Emulation Station

7. Center the screen for each system
(Note : use a horizontal game for arcade and fba)
Open a game, bring up the retroarch menu
Go to “Settings > Video”, set the following Video Settings for each system in order to center and fit the screen.
Custom Aspect Ratio X Pos.
Custom Aspect Ratio Y Pos.

8. Save Configuration once per each system.
Configuration > Save Current Configuration

9. Repeat step 7 and 8 until all systems are configured.

10. Enjoy and post your results.

*** For consoles/handhelds not in the list, please follow these instructions.

1. Open a game, bring up the retroarch menu

2. Go to “Settings > Video”, set the following Video Settings in order to center and fit the screen.

Aspect Ratio = Custom
Custom Aspect Ratio X Pos. = user entered
Custom Aspect Ratio Y Pos. = user entered
Integer Scale = ON
Custom Aspect Radio Width = user entered
Custom Aspect Radio Height = (1x)

3. If the picture still does not fill the screen horizontally, set “Integer Scale = OFF”. Adjust “Custom Aspect Radio Width” and below to center if needed.
Custom Aspect Ratio X Pos. = user entered
Custom Aspect Ratio Y Pos. = user entered