SLG 3000 is another comunity based product. Its purpose is to generate scanlines for VGA standard 640 x 480 using modern display.
Thus SLG3000 is perfect to get arcade feeling for games coming from the 15Khz times.
Features
- No external PSU is needed
- Plug inbetween your VGA Source and display
- 2 VGA female plugs
- DIP settings for even and odd lines
- DIP settings for different resolutions
- adjust scanlines continuously via potentiometers
- Screw terminals for on and off switch
Quick Info
DIP Settings
| Resolution | DIP4 | DIP5 | Effect |
|---|---|---|---|
| 640 x 480 | OFF | ON | Odd Rows (1, 3, 5, …) for scanlines |
| 640 x 480 | ON | OFF | Even Rows (2, 4, 6, …) for scanlines |
| 600 x 800 | OFF | OFF | Even Rows (2, 4, 6, …) for scanlines |
| 1024 x768 | OFF | ON | Odd Rows (1, 3, 5, …) for scanlines |
| ON | OFF | Even Rows (2, 4, 6, …) for scanline | |
| 1280 x 800 | OFF | ON | Odd Rows (1, 3, 5, …) for scanlines |
| ON | OFF | Even Rows (2, 4, 6, …) for scanline | |
| 1280 x 1024 | OFF | OFF | Odd Rows (1, 3, 5, …) for scanlines |
| 1600 x 1200 | OFF | OFF | Odd Rows (1, 3, 5, …) for scanlines |
Use DIPs 1, 2, 3 for turning the scanlines to 100% dark. The DIPs 1, 2, 3 refer to the RGB Colors.
SLG 3000 has two screw terminals to enable and disable the scanlines. Wire a normal switch to both these screw terminals. SLG3000 is active by default.
Support
Documentation