MAK/Supergun is a device that allows to connect original Arcade-PCBs on a normal TV. MAK means Mega Arcade Konsole.
MAK Strike prepares the signals coming from a Arcade PCB so that it’s possible to play them with a normal joystick and TV.
Features :
- 2x DSUB15 connectors for NeoGeo Standard Sticks
- Screw Terminals for Button4, 5, 6 for Player 1 and Player 2
- Extended Jamma Standard with Buttons 4, 5, 6 for Player 1 and Player 2
- 1x Scart RGB 15Khz
- 1X Mono Speaker via Chinch
- Molex Power Connector for 5v and 12V, optional with Screw Terminals
- -5V screw terminal
- screw terminal for Stereo Sound
- on PCB Button for “Service Coin” and Test
- On and Off switch
- Power Led
- PCB size fits in COTS case
- Pin 7, Pin H protected
Interfaces
| Parts Side | Solder Side | ||
| GND | 1 | A | GND |
| GND | 2 | B | GND |
| +5V | 3 | C | +5V |
| +5V | 4 | D | +5V |
| -5V | 5 | E | -5V |
| +12V | 6 | F | +12V |
| NC | 7 | H | NC |
| Coin Counter 1 | 8 | J | Coin Counter 2 |
| Lock Out 1 | 9 | K | Lock Out 2 |
| Speaker +, Audio L | 10 | L | Speaker -, GND |
| Player 1 Button 6 | 11 | M | Player 2 Button 6 |
| Video Red | 12 | N | Video Green |
| Video Blue | 13 | P | Video Sync |
| Video GND | 14 | R | Service Switch |
| Test Switch | 15 | S | Slam Switch |
| Coin Switch 1 | 16 | T | Coin Switch 2 |
| Player 1 Start | 17 | U | Player 2 Start |
| Player 1 Up | 18 | V | Player 2 Up |
| Player 1 Down | 19 | W | Player 2 Down |
| Player 1 Left | 20 | X | Player 2 Left 2 |
| Player 1 Right | 21 | Y | Player 2 Right |
| Player 1 Button 1 | 22 | Z | Player 2 Button 1 |
| Player 1 Button 2 | 23 | a | Player 2 Button 2 |
| Player 1 Button 3 | 24 | b | Player 2 Button 3 |
| Player 1 Button 4 | 25 | c | Player 2 Button 4 |
| Player 1 Button 5 | 26 | d | Player 2 Button 5 |
| GND | 27 | e | GND |
| GND | 28 | f | GND |
MAK Strike Controller Port Pinout
| DSUB 15 pin | Neo Geo | MAK STRIKE |
| 1 | Ground | Ground |
| 2 | NC | Button 5 |
| 3 | Select | Coin |
| 4 | D | Button 4 |
| 5 | B | Button 2 |
| 6 | Right | Right |
| 7 | Down | Down |
| 8 | 5V | 5V |
| 9 | D | NC |
| 10 | NC | Button 6 |
| 11 | Start | Start |
| 12 | C | Button 3 |
| 13 | A | Button 1 |
| 14 | Left | Left |
| 15 | Up | Up |
Controller Ports
Support Controllers with 6 Buttons. Controller Ports are neo geo compatible.
Sound
Sound is available via Cinch connector for Mono. Additionally Sound is offered via über SCART and screw terminal. Screw Terminal “Audio_L” forwards the Mono Signal. A GND screw terminals exists on the board, too.
Mono Sound to Scart Stereo
Arcade PCB with Mono Sound could be extended to Stereo Sound. Wire Audio_L with Audio_R terminal. Thus Arcade PCB outputs stereo via SCART.
Video
RGB SCART TV and a full SCART Cable are needed.
Power Supply Unit
MAK Strike support Molex connectos for normal PC PSUs. Thus 5V and 12 V can be connected. Connect -5V for some games via screw terminal.
Support
Documentation
English see this site