Pi2Jamma old Image

Pi2jamma worked on release time with a preliminary image, the so called arcade image. This image is outdated will not longer supported. Find here some docs.

Arcade Image

The Arcade Image is the second offered Image for the Raspberry Pi and contains only Arcade Emulators. Please do not use Arcade Image for Pi2SCART.

Download arcade image
Password “arcade-zone”

The Arcade Image offers Mame4all and piFBA. For further features see readme file on USB Stick.

The Arcade Image has three roms folders on the USB Stick

  • rpi2jamma/roms_m4all
  • rpi2jamma/roms_fba
  • rpi2jamma/roms_advmame

Copy your roms in this directories. Take care that your take the correct rom set.

  • Mame4All – 0.37b5
  • AdvMame – 0.106
  • FBA2X – 0.2.96.71

 

Pi2Jamma Installation

Prerequisites:

Hardware

  • Pi2Jamma PCB
  • Stock Audio Cable for Pi2Jamma
  • SD Card for Raspberry Pi
  • Raspberry Pi 3
  • USB Stick

Software

Installation

Step 1. Insert SD card to Raspberry Pi
Step 2. Insert USB Stick to Raspberry Pi
Step 3. Plug Audio Cable to Raspberry Pi
Step 4. Plug Raspberry Pi to Pi2jamma
Step 5. Plug Audio Cable to Pi2jamma
Step 6. Plug Pi2jamma to your Arcade Cab

You should see menu booting up. Congratulations you can now start copying your roms to the USB Stick.

Pi2Jamma Hardware

The Pi2Jamma comes with a GPIO female connector and will be plugged directly on the Raspberry Pi.

The Pi2Jamma has a Jamma Interface. The Jamma harness will plugged on the Jamma connector without any modification on the cab. Parts side is the top Side.

For Audio the stock audio cable will be plugged to the audio connector of the Pi2Jamma and Raspberry Pi.

Volume control is on the black potentiometer on the Pi2Jamma. Adjust it to your needs.

Button 4, 5 for both Player is on Jamma Connector Pin 25 and 26 and bottom side. Bottom 6 for both players is available on the screw terminal. The screw terminals has also one GND.

Raspberry Pi is powered via Jamma. Again, there’s no need for extra power, just Jamma interface. Raspberry Pi has over voltage protection.

Pi2Jamma Enclosure

3d Printable Enclosure v1 with 2 pcb holes

Pi2Jamma_Enc Pi2Jamma_Enc_01 Pi2Jamma_Enc_02 Pi2Jamma_Enc_03

Pi2Jamma 3D Enclosure for PCB with holes

pi2jamma_enc_4_01 pi2jamma_enc_4_02 pi2jamma_enc_4_03 pi2jamma_enc_4_04 pi2jamma_enc_4_05 pi2jamma_enc_4_06

Comments are closed.